5 axis double station automatic lock screw machine

5 axis double station automatic lock screw machine

Product Details

Device Description:

1. The device is controlled by a motion control card

2. Working sequence: manual feeding-screw lock attachment-manual cutting.

3. Action description: Start the switch, Y1 / Y2 axis enters the work area, and perform screw lock payment. After the lock payment is completed, return to the zero position, remove the product, and cycle.

4. The equipment is easy to operate, with high efficiency, saving labor costs, and the payment time of a single screw lock is about 1.4-1.6S.

Benefit analysis of equipment introduction:

Direct economic benefits:

1.This equipment greatly improves the efficiency of the production line; saves labor; reduces costs; indirect benefits

2.This equipment can greatly reduce the labor intensity of the operating staff;

Daily maintenance and maintenance of screw machine:

1. Regularly clean the screw silo to ensure that the silo is clean. It is recommended to start the machine when there are no screws in the silo and blow out the dust and residue in the silo and the side of the nail lifter with high pressure gas, and clean it once a day.

2. Regularly clean the screw track to ensure that the screw runs smoothly in the track.

3. Regularly clean the nail feeding system to ensure that the nail feeding system runs smoothly. It is recommended to blow with a high-pressure gun once a week and add an appropriate amount of grease to the moving part.

4. Regularly clean the outer surface of the case.

5. Please turn off the power every day after work and when not in use.